Conformable RF Cable Assemblies

Picture for category Conformable RF Cable Assemblies

SV Microwave's conformable RF cable assemblies can be easily formed by hand and provide equal if not better electrical performance than standard semi-rigid or flexible cable. The braided outer shield of the standard flexible cable is replaced with a tin-plated outer braid that is durable, but flexible. Conformable or hand-formable cable assemblies are ideal when the cable bends must be determined during the installation of the assembly.

Features / Benefits: 

  • Easily formed by hand to fit almost any application
  • Conformable cable assemblies allow bending by hand during installation
  • Tin-plated outer sheath provides protection while allowing flexibility
  • No signal degradation due to handling of assembly orientation

Applications:

  • Military and Aerospace
  • Test and Instrumentation

2.92 mm

 Impedance (Ω)  50
 Frequency GHz  40 GHz
 Shielding Effectiveness  ≥ -100 dB
 Dielectric withstanding Voltage  750 VRMS
 Mating Cycles  500
 Mating Torque  7 - 10 in - lbs
 Inter-mate ability  SMA, 3.5mm
 Temperature Rating  -65°C to +165°C
 Corrosion (salt spray)  MIL-STD-202, Method 101, Condition B
 Vibration  MIL-STD-202, Method 204, Condition D
 Shock  MIL-STD-202, Method 213, Condition I
 Thermal Shock  MIL-STD-202, Method 107, Condition B
 Moisture Resistance  MIL-STD-202, Method 106, Less Step 7B
 Barometric Pressure (Altitude)  MIL-STD-202, Method 105, Condition C, 70k Ft.

 

SMA

 Impedance (Ω)  50
 Frequency GHz  18 GHz (select models to 26.5 GHz)
 Shielding Effectiveness  ≥ -90 dB
 Dielectric withstanding Voltage  1000 VRMS
 Mating Cycles  500
 Mating Torque  7 - 10 in - lbs
 Inter-mate ability  2.92mm, 3.5mm
 Temperature Rating  -65°C to +165°C
 Corrosion (salt spray)  MIL-STD-202, Method 101, Condition B
 Vibration  MIL-STD-202, Method 204, Condition D
 Shock  MIL-STD-202, Method 213, Condition I
 Thermal Shock  MIL-STD-202, Method 107, Condition B
 Moisture Resistance  MIL-STD-202, Method 106, Less Step 7B
 Barometric Pressure (Altitude)  MIL-STD-202, Method 105, Condition C, 70k Ft.

 

Filters
7015-1077
2.92mm Cable Assemblies 7015-1077
Datasheet
7015-1078
2.92mm Cable Assemblies 7015-1078
Datasheet
7029-3579
SMA Cable Assemblies 7029-3579
Datasheet
7029-3580
SMA Cable Assemblies 7029-3580
Datasheet
Filters Clear All