1.00mm RF Series

The 1mm connector was designed for mode-free operation through 110GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the other millimeter wave connectors, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1 mm interface uses an M4 x 0.7 thread.

Impedance (Ω)	50
Frequency GHz	110 GHz
Shielding Effectiveness	≥ -90 dB
Dielectric withstanding Voltage	250 VRMS
Mating Cycles	500
Mating Torque	3-5 in-lbs
Temperature Rating	-65°C to +165°C
Corrosion (salt spray)	MIL-STD-202, Method 101, Condition B
Vibration	MIL-STD-202, Method 204, Condition D
Shock	MIL-STD-202, Method 213, Condition I
Thermal Shock	MIL-STD-202, Method 107, Condition B
Moisture Resistance	MIL-STD-202, Method 106, Less Step 7B
Barometric Pressure (Altitude)	MIL-STD-202, Method 105, Condition C, 70k Ft.